The wait is finally over, eLeaf introduces the successor to what is likely the most popular kit among beginners! Pico 2, which has been slightly revised in design, was equipped with the already well-known GZeno S tank.
Elegant design meets technical sophistication.
With dimensions of 27.5 mm x 50 mm x 59 mm and an empty weight of 127 g, Pico 2 is the ideal companion on the go. As with the first Pico, the battery cover is located in the upper area of the mod, but this time it leaves enough space for coils with a diameter of up to 25 mm.
There is an embossed texture on the side panels, which not only enhances the design but also provides the necessary grip. The chassis, made of metal, has received a robust coating, which is typical for eLeaf, thus also demonstrating physical durability.
Pico 2 also takes its predecessor as a model when it comes to the arrangement of the individual elements such as the display. Only the plus and minus buttons have slid from the floor to the front of the battery holder. They are very easy to feel, and the firing button disappears upwards into the battery holder in a wedge shape, which provides extra grip during operation. Additionally, a tight pressure point counteracts unintentional activation.
There is space for an 18650 battery under the grip-friendly battery cover, which provides plenty of capacity and in combination with the modern chipset an available power of up to 75 watts. Experience has shown that the internal chip runs very reliably and combines all the important protection functions. Pico 2 Mod is charged with up to 2 amperes charging current via the USB Type-C port embedded in the front, ensuring a fast and secure charging process.
Simple and smart
The GZeno S tank from Eleaf can be filled quickly and easily using an easy-to-use top filling system. The liquid level can always be read optimally and GZeno S Tank appears to be of very high quality and well thought out in both design and use.
The airflow can be easily adjusted via a generous air intake and is designed for both RDL and DL. This is also reflected in the included 0.4 ohm and 0.8 ohm coil which brings excellent flavour development in a performance range that is optimised for Pico.
Please note that batteries are not included.
eLeaf Gzeno S tank
510 thread
Tank volume: 4.0 ml
Coils: Eleaf GZ Coil series
Diameter: 24.5 mm
Drip tip: 510
eLeaf iStick Pico 2 Mod
Dimensions: 27.5 mm x 50 mm x 59 mm
Weight: 127g
Connection: 510 thread
Battery: 1 x 18650 battery
Display: 0.49" OLED display
Output modes: VW
Output power: 1W-75W
Output voltage: 0.5 volt-8 volt
Resistance range: 0.05 ohm-3.0 ohm
Charging current: 2A
Charging: external or via USB Type-C port
Contains
1 x eLeaf iStick Pico 2 Mod
1 x eLeaf GZeno S tank
1 x eLeaf GZ 0.4 ohm coil (pre-installed)
1 x eLeaf GZ 0.8 ohm coil
1 x USB Type-C cable
2 x user manual
2 x spare parts
